Home/Products/15.2 mm PC strand

1×7 PC strand — 15.2 mm, 1860 MPa

The default tendon for post-tensioned bridges and heavy precast work. 140 mm² of steel, 260 kN minimum breaking load, supplied in 3–3.5 t coils with the mill's batch certificate.

1×7 15.2 mm prestressed concrete steel strand coils in export packing

Specification

PropertyValue
Construction1×7 seven-wire, left-hand lay (S)
Nominal diameter15.20 mm (ASTM 0.600 in)
Nominal steel area140 mm²
Grade1860 MPa (ASTM Grade 270), low relaxation
Minimum breaking load260.4 kN (= 140 mm² × 1860 MPa)
Measured breaking load, recent batchesFm 267–273 kN
0.2% proof loadFp0.2 244–253 kN
Elongation at maximum load5.1–7.0%
Modulus of elasticity194–197 GPa
Relaxation1.1% at 70% Fm, 1000 h (standard allows 2.5%)
Coil weight3.0–3.5 t
Coil length2,700–3,300 m
PackingSteel strap + wooden/steel support, waterproof paper or plastic-film wrap; light rust-preventive spray or non-oiled supply on request
StandardsGB/T 5224-2023; ASTM A416/A416M on request

Measured values are taken from batch quality certificates for 1×7-15.20, 1860 MPa, 2026 production. They are typical, not a guaranteed minimum — the certificate for your own batch governs.

What the numbers mean

A 15.2 mm seven-wire strand has a nominal steel area of 140 mm². At 1860 MPa that gives a minimum breaking load of 260.4 kN — the figure your designer uses for tendon capacity. Recent batches measure 267–273 kN, about 3–5% above the minimum, which is normal for low-relaxation strand produced on modern lines.

Relaxation is the number that separates a cheap strand from a correct one. Standard low-relaxation strand is allowed 2.5% loss at 70% of breaking load over 1,000 hours; the batches we ship measure around 1.1%. Over a 30-year design life that difference is real, and it is why the mill's relaxation test report matters as much as the tensile test.

Standards

Supplied to GB/T 5224-2023 by default. For projects specified to US practice, the same product is produced and certified to ASTM A416/A416M Grade 270, low relaxation; 15.20 mm is the 0.600 in size. See the standard-by-standard comparison if you need to decide which to call for.

Packing and marking

Coils are strapped with steel band, seated on wooden or steel supports, and wrapped in waterproof paper, hessian or plastic film. A light rust-preventive spray, or a non-oiled supply, can be agreed in the contract. Each coil is marked with size, grade, batch number, heat number, weight and length — the marking matches the certificate, so the coil can be checked on site without opening the wrap.

Documentation

  • Batch quality certificate (mechanical properties, per coil)
  • Commercial invoice and packing list
  • Bill of lading, certificate of origin
  • Third-party inspection report (SGS, BV or your nominated surveyor) on request

Full list: which documents come with the shipment.

Delivery

Regular sizes: 5 working days from receipt of deposit. FOB Tianjin, CIF Karachi, or DDP into Pakistan through the Khunjerab route — details on the Pakistan delivery page. Minimum order is one 20 ft container, roughly 25 t.

Prices move with the steel index. Send tonnage and destination and we will quote against the current mill price rather than a stale list.

Related

Quote for 15.2 mm strand

Tell us tonnage and destination port — we reply within one business day.

Request a quote