Home/Products/Anchor strand 1×19

Anchor strand — 1×19, 17.8–30.7 mm

Heavier strand for mining roadway support, slope anchoring and heavy post-tensioning, where a single tendon has to carry several hundred kN and survive handling underground.

Strand samples including 1×19 anchor strand in the mill showroom

Range

ConstructionDiameterGradeTypical application
1×19 S17.8 – 21.6 mm1860 / 1770 MPaMining roadway anchor cable, slope stabilisation
1×19 W21.6 – 30.7 mm1860 / 1770 MPaHeavy anchorage, large-span structures

Why 1×19

Nineteen wires give a larger steel area in a compact diameter and better resistance to bending and abrasion than a seven-wire strand of the same capacity — useful when the tendon is pushed into a borehole and grouted. It is also less prone to bird-caging when the cable is coiled tightly for transport.

Supply

Produced to GB/T 5224 or to an agreed technical specification, with the same batch certificate regime as our seven-wire strand: measured breaking load, proof load, elongation and modulus per coil, plus marking that matches the certificate.

Anchor accessories — anchors, bearing plates, grouting tubes — can be consolidated in the same container. Ask when you request the quote.

Related: 15.2 mm PC strand · packing and coil weight.

Anchor strand enquiry

Diameter, tonnage, and whether you need accessories in the same container.

Request a quote