Home/Products/12.7 mm PC strand

1×7 PC strand — 12.7 mm, 1860 MPa

The 0.5 in size: 98.7 mm², 183.6 kN minimum breaking load. Used where tendons are shorter or more numerous — precast beams, poles, slabs and small post-tensioned elements.

12.7 mm prestressed strand coils in the mill warehouse

Specification

PropertyValue
Construction1×7 seven-wire, left-hand lay (S)
Nominal diameter12.70 mm (ASTM 0.500 in)
Nominal steel area98.7 mm²
Grade1860 MPa (ASTM Grade 270), low relaxation
Minimum breaking load183.6 kN (= 98.7 mm² × 1860 MPa)
RelaxationLow relaxation, typically ≈1% at 70% Fm / 1000 h
Coil weightTo your requirement, typically 2.5–3.5 t
PackingSteel strap + wooden/steel support, waterproof wrap; light rust-preventive spray or non-oiled supply on request
StandardsGB/T 5224-2023; ASTM A416/A416M on request

When to choose 12.7 mm over 15.2 mm

Capacity per tendon is about 30% lower, but the strand is lighter and bends to a tighter radius, which helps in thin precast sections and in factory production where tendons are placed densely. If your design already fixes the tendon count and spacing, the choice is made for you — we simply supply to that specification.

Standards and documentation

Available to GB/T 5224-2023 or ASTM A416 Grade 270. Every coil is certified with measured breaking load, proof load, elongation and modulus, and marked with its batch and heat number. Third-party inspection before loading can be arranged.

Coil weight and length are agreed per order — say what your yard can lift and we will match it.

See also: 15.2 mm strand · ASTM A416 vs GB/T 5224 · packing details.

Quote for 12.7 mm strand

Send tonnage and port — reply within one business day.

Request a quote